1. Home
  2. Coffee Forum
  3. Gaggia steam problem

Gaggia steam problem

Could anyone offer a solution to a steam problem I'm having with my 'Gaggia Espresso Dose'. The steam stops after about four seconds. The wand (Silva mod) is clear and when the "Hot Water" button is pressed there is a good flow. But when used for steam it just dies out after a few seconds. I have de-scaled it (even though I live in Scotland and have never had to de-scale a kettle - ever!). I can confirm it is getting hotter when the steam button is pressed and it does produce good steam - just not for long enough to foam the milk.

It otherwise works correctly.

TIA Slatts

Reply to
Sla#s
Loading thread data ...

You will all no doubt be delighted to learn that I fixed it.... Well ...

OK... someone might be! And as this seems to be reposted to several Coffee

web groups I though I would give you the word.

I was incorrect when I thought the secondary heating was working when the

steam button was pressed, the light coming on must have been one of those

annoying coincidences that engineers will be familiar with!

Further testing revealed that the Steam button switch had burnt out. It is easy to

take apart (if you are use to mending watches :-) and responded to having

the contacts cleaned.

It all now works AOK.

Reply to
Sla#s

DrinksForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.